How is energy from grass passed on between animals

The resulting molality is 0.17 m, and the freezing point depression is -114.1°C.

Freezing point is the temperature at which a liquid will turn into a solid. It is usually measured in degrees Celsius. When a liquid reaches its freezing point, the molecules slow down and lose energy, causing them to become arranged in a solid crystalline pattern. The freezing point of water is 0°C (32°F) but this varies for other substances. For example, the freezing point of alcohol is much lower than that of water.
The freezing point of the solution is -114.1°C. This is calculated using the formula ΔTf = iKf·m, where ΔTf is the freezing point depression, i is the Van't Hoff factor, Kf is the freezing point constant of water, and m is the molality of the solution. For a solution of ethyl alcohol, i is 2 and Kf is 1.86 °C·m⁻¹. The molality of the solution is calculated by dividing the mass of the solute (20.0 g) by the mass of the solvent (590.0 g) and the molar mass of the solute (46.07 g/mol). The resulting molality is 0.17 m, and the freezing point depression is -114.1°C.
To know more freezing point click-
https://brainly.com/question/24314907
#SPJ4

The chemical described in the question is likely to affect the organelles called chloroplasts and mitochondria.

Chloroplasts are organelles found in plant cells that are responsible for photosynthesis, the process by which plants convert light energy into chemical energy. They contain pigments such as chlorophyll, which absorbs light energy and converts it into chemical energy in the form of ATP (adenosine triphosphate). If the production of proteins involved in the capture and storage of energy is blocked, chloroplasts will be unable to produce ATP, which is an essential energy source for plants.

Mitochondria are organelles found in the cells of all eukaryotes (organisms with cells that contain a nucleus and other membrane-bound organelles). They are the main site of cellular respiration, the process by which cells convert energy stored in organic molecules into ATP. If the production of proteins involved in the capture and storage of energy is blocked, mitochondria will be unable to produce ATP, which will affect the energy metabolism of the cell.

Overall, the chemical described in the question is likely to have a detrimental effect on the energy metabolism of plants, leading to reduced growth and vitality.

When a carbon atom bonds with one s-orbital and two p orbitals, it becomes sp2 hybridized. Between the three atoms, two single bonds and one double bond are formed.

What is Hybridization of carbon ?

Four sp3 orbitals are created when the 2s and all three of the 2p orbitals of carbon combine. Through an overlap of the sp3 and s orbitals, these orbitals subsequently form a link with four hydrogen atoms to form methane.

According to the given question:

Carbon consists of six electrons. In the 1s orbital, just outside the nucleus, there will be two of them. The following two will enter the orbital phase 2s. The rest will be split into two distinct 2p orbitals.

Learn more about Hybridization here:

brainly.com/question/22765530

#SPJ4

Answer:

To determine how many grams of NaOH are produced from 120 grams of Na₂O, we need to first understand the chemical reaction that occurs when Na₂O is converted to NaOH. The reaction is as follows:

2 Na₂O + 2 H₂O → 2 NaOH + O₂

This reaction shows that for every 2 molecules of Na₂O that are converted to NaOH, 2 molecules of water are also produced.

Next, we need to determine the molar mass of Na₂O and NaOH. The molar mass of Na₂O is 61.98g/mol, and the molar mass of NaOH is 40.00g/mol.

Now we can use the molar masses to determine how many grams of NaOH are produced from 120 grams of Na₂O. First, we need to convert the mass of Na₂O from grams to moles by dividing by the molar mass:

120g Na₂O / 61.98g/mol = 1.94 mol Na₂O

Next, we need to multiply the number of moles of Na₂O by the conversion factor from the chemical reaction (2 mol NaOH / 2 mol Na₂O) to determine the number of moles of NaOH produced:

1.94 mol Na₂O * (2 mol NaOH / 2 mol Na₂O) = 1.94 mol NaOH

Finally, we can convert the number of moles of NaOH to grams by multiplying by the molar mass of NaOH:

1.94 mol NaOH * 40.00g/mol = 77.6g NaOH

Therefore, 120 grams of Na₂O will produce approximately 77.6 grams of NaOH.

Answer:

yea hold them in your hand for a while and your hand will look like a rainbow

Explanation:

The given compounds can be named based on the IUPAC rule. The compound A is named as dibromoethane and B is  2-bromo-3-chloro-4-methyl heptane. The compound C is hex-2-ene. Compound d  is named as heptane and e is called 1-chloro-6-bromo-hexane. The name of the compound f is 2-chloro hexane.

IUPAC rules are certain rules regarding the naming of organic compounds. The compounds are numbered based on the longest chain of carbon atoms in it. The numbering starts from the position of double bond or triple bond if present or the functional groups is noted.

The name is given in the alphabetical order of the prefix of the functional groups and the numbering is put in a manner that the carbons bearing the functional groups have the small numbers.

The given compounds can be named based on the IUPAC rule. The compound A is named as dibromoethane and B is  2-bromo-3-chloro-4-methyl heptane. The compound C is hex-2-ene. Compound d  is named as heptane and e is called 1-chloro-6-bromo-hexane. The name of the compound f is 2-chloro hexane.

To find more on IUPAC rules, refer here:

https://brainly.com/question/27915542

#SPJ4

Answer:

The reaction of 112 cm³ of chlorine at STP with an excess of sodium can produce 0.292 grams of NaCl.

Explanation:

The reaction of chlorine with sodium can produce sodium chloride (NaCl), which is also known as table salt. To determine how many grams of NaCl can be produced by this reaction, we need to know the molar mass of NaCl and the number of moles of chlorine that are reacted.

The molar mass of NaCl is 58.44 g/mol. This means that 1 mole of NaCl has a mass of 58.44 grams.

To find the number of moles of chlorine that are reacted, we need to convert the volume of chlorine from cubic centimeters (cm³) to liters, and then use the ideal gas law to calculate the number of moles. At standard temperature and pressure (STP), 1 mole of any gas occupies a volume of 22.4 liters. Therefore, the number of moles of chlorine can be calculated as follows:

moles = (volume of chlorine at STP) / (volume of 1 mole of any gas at STP)

In this case, the volume of chlorine is 112 cm³, which is equivalent to 0.112 liters at STP. Therefore, the number of moles of chlorine can be calculated as follows:

moles = 0.112 liters / 22.4 liters/mol

This gives a result of 0.005 moles of chlorine.

Since the reaction produces an excess of sodium, we can assume that all of the chlorine that is reacted is converted into NaCl. Therefore, the mass of NaCl that is produced can be calculated by multiplying the number of moles of chlorine by the molar mass of NaCl:

mass = (number of moles) * (molar mass of NaCl)

In this case, the mass of NaCl that is produced is 0.005 moles * 58.44 g/mol = 0.292 grams.

Therefore, the reaction of 112 cm³ of chlorine at STP with an excess of sodium can produce 0.292 grams of NaCl.

The elements which tends to form ionic bonds are metals and non-metals. Hence, the compounds that are formed from metals and nonmetals have ionic bonds between them.

Ionic bond, also known as electrovalent bond is a type of linkage that is formed from the electrostatic attraction between oppositely charged ions in a chemical compound. Ionic bonds are formed when the valence (outermost) electrons of one atom are transferred permanently to another atom.

Ionic compounds are generally formed between elements that are metals and elements that are nonmetals. For example, let's consider the metal calcium (Ca) and the nonmetal chlorine (Cl) form the ionic compound calcium chloride (CaCl₂). In this ionic compound, there are two negative chloride ions (anions) for each positive calcium ion (cations).

Learn more about ionic bonds from the link given below.

https://brainly.com/question/29761128

#SPJ4

The freezing point depression formula is ΔTf = Kf ·m, where ΔTf is the freezing point depression, Kf is the cryoscopic constant, and m is the molality of the solution.

The temperature when a liquid changes into a solid is known as the freezing point.. It is the temperature at which the molecules of the liquid become less active and form a solid structure. For a given substance, the freezing point is usually the same as the melting point, the temperature at which a solid changes to a liquid.Other substances have different freezing points; for example, oxygen freezes at -218°C (-361°F) and hydrogen at -259°C (-434°F). Freezing point is an important concept in the study of thermodynamics, as it is the point at which the energy of a system changes form and the phase of the substance changes.

ΔTf is the difference between the freezing point of the pure solvent and the freezing point of the solution. Kf is the change in freezing point per mole of solute. m is the number of moles of solute per kilogram of solvent.
In other words, the freezing point depression formula can be used to calculate the freezing point of a solution based on the freezing point of the pure solvent and the molality of the solute.

To learn more about freezing point
https://brainly.com/question/40140
#SPJ4

Instead, Cupid fell in love with Psyche to the point where he married her, but only under a condition that she never see his face.Psyche eventually gave in to her curiosity and sneaked a glimpse, sending Cupid running in rage.

In order for Psyche to fall in love to something repulsive, Cupid is dispatched to shoot her with an arrow.Instead, he uses his own dart to scratch himself, which makes anything that is alive fall in loves with the very first thing he sees.He consequently breaks his mother's command because he is so in love with Psyche.

Eros (Roman Cupid), the deity of love, and his wife PSYKHE (Psyche), the goddess of a soul.She was originally a mortal princess, and when mankind started to worship her instead of the goddess Aphrodite (Roman Venus), the goddess became enraged.

To know more about Cupid visit:

https://brainly.com/question/29615439

#SPJ4

The mass of Barium-122 left is 0.313 g. All nuclear reactions are of first order reactions.

A first-order reaction is one in which the rate of reaction is proportional to the concentration of the reactant. For a first order reaction rate constant,

k = ( 2.303 /t )x log ( Mo / M)

Where

Mo = initial mass= 10.0 g

M= Mass left after time t = ?

t = time = 10 min

k= rate constant= 0.693/half life

= 0.693/2 min

= 0.3465 min^-1

Plug the values we get log(Mo/M) = (kt)/2.303

= (0.3465*10)/2.303

= 1.504

Mo/M=10^1.504 = 31.9

M= 10.0g/31.9

  = 0.313 g

So, mass of Barium-122 left is 0.313g.

To learn more about first order reaction check the link below:

https://brainly.com/question/518682

#SPJ4

What intermolecular force(s) are present in SF6? Hydrogen bonding, dipole-dipole, and dispersion forces are present. There are only dispersion forces at play. just dipole and dispersion

Intermolecular force types. Dipole-Dipole Interactions, part one. Polar molecules are attracted to one another through dipole-dipole interactions. Permanent dipoles are present in polar compounds. Ion-Dipole Interactions, Section 2. Ion Induced Dipole Interactions, number 3, Dipole-Induced Dipole Interaction, Figure 4. Dispersion forces or London forces, number five. Because it mirrors the strength of intramolecular forces, the hydrogen bond is the only intermolecular force with the word "bond" in its name. A hydrogen atom's attraction to molecules that contain highly electronegative atoms like nitrogen (N), oxygen (O), and fluorine (F) (F).

The strongest intermolecular force is a hydrogen bond, with

To learn more about dispersion please click on below link

https://brainly.com/question/13265071

#SPJ4

Answer:

latent heat of fusion of ice is the amount of heat required to change the state of a body from solid to liquid at a constant temperature .

Answer:

Thin layer chromatography is a chromatographic technique used to separate the components of a mixture using a thin stationary phase supported by an inert backing and a mobile phase. The separation principle is in the different affinities between the components of the mixture and the stationary or mobile phase.

The affinity in mobile phase could be improved changing the polarity of this phase. In this case, you could change proportion of hexane/ethyl acetate to change polarity of mobile phase and the affinity of the different compounds to mobile or stationary phase.

Explanation:

[tex](NH_4)_2S[/tex]  will form as a solid precipitate in this reaction.

The double displacement reaction is a reaction in which two reactants exchange ions to produce 2 new compound. As an consequence of double displacement reaction , precipitates frequently occur. A precipitate is created when two components from the solution combine.

It is obvious that the sulfide group formed the precipitate because sulfides are often not soluble in water but sodium nitrate is easily soluble in water.

so   [tex](NH_4)_2S[/tex]   will form precipitate during this double displacement reaction.

To know more abut double displacement reaction click on below link:

https://brainly.com/question/29307794#

#SPJ4

The possible Lewis structures of C₄H₈ with every Lewis structure include one double bond between 2C atoms is attached as a picture.

The alkene butene, often known as butylene, has the chemical formula C₄H₈. Any of the several chemicals may be referred to by the word "butene." They are odorless gases that are found in crude oil in trace amounts that are insufficient for practical extraction. Therefore, butene is produced through the catalytic cracking of long-chain hydrocarbons left behind after crude oil has been refined. Fractional distillation is used to separate the butene from a mixture of products created by cracking.

There are five different constitutional isomers that can be formed using the formula C₄H₈. But-1-ene, but-2-ene, 2-Methylpropane, Cyclobutane, methylcyclopropane.

You can also learn about Lewis structures from the following question:

https://brainly.com/question/20300458

#SPJ4

The nuclear reaction is expressed as  [tex]\left \ {{74} \atop {32}} \right Ge[/tex] ⇒ [tex]\left \ {{74} \atop {31}} \right Ge[/tex] +  [tex]\left \ {{0} \atop {+1}} \right e[/tex] and  [tex]\left \ {{11} \atop {12}} \right C[/tex] ⇒ [tex]\left \ {{11} \atop {11}} \right C[/tex] +  [tex]\left \ {{0} \atop {+1}} \right e[/tex]

A proton undergoes positron decay, which results in the creation of neutrons, electron neutrinos, and positron particles. This particle has a +1 unit charge.

[tex]\left \ {{A} \atop {Z}} \right X[/tex] ⇒ [tex]\left \ {{A} \atop {Z-1}} \right X[/tex] +  [tex]\left \ {{0} \atop {+1}} \right e[/tex]

The positron decay mode is especially useful for detection and quantification using outside measurement. When a proton is converted to a neutron and a positron, or "+-particle," is simultaneously emitted from the nucleus of a neutron-deficient isotope, the decay process starts [2]. With the exception of its positively rather than negatively charged charge, the positron shares many physical characteristics with an electron. The positron that is released is slowed down by energy loss to the surrounding matter along its route before combining with an electron.

Learn more about Nuclear equation at https://brainly.com/question/29051075

#SPJ4

To solve such this we must know the concept of chemical reaction. Therefore, b is not transition state as Transition state is not stable in a reaction.

Chemical reaction is a process in which two or more than two molecules collide in right orientation and energy to form a new chemical compound. The mass of the overall reaction should be conserved. There are so many types of chemical reaction reaction like combination reaction, double displacement reaction.

For b can be isolated or not, we must know whether b is transition state or intermediate by drawing energy level diagram. Intermediate can be isolated and it is stable. Transition state is not stable and hence can not be isolated.

Therefore, B is not transition state.

Learn more about the chemical reactions, here:

brainly.com/question/3461108

#SPJ1

The concentration of the solution is 11.11%.

Concentration is a measure of how much of a given substance is present in a given volume or mass of another substance. Measuring and understanding the concentration of a solution is important in a variety of fields, such as chemistry, biology, and medicine.
20 grams of solid is dissolved in 180 grams of water, which is equal to 20/200 x 100 = 11.11%. This means that the solution has a concentration of 11.11%. This is also known as a mass-by-mass percent concentration.
To calculate the concentration of a solution, divide the mass of the solute (the solid) by the total mass of the solution (the solid plus the solvent, which is water in this case). Then, multiply the result by 100 to get the concentration in percent.
It is important to note that the concentration of a solution is dependent on the ratio of solute to solvent, and that the concentration can be expressed in different ways, such as molarity or molality. The concentration of a solution can also be expressed in terms of parts per million (ppm) or parts per billion (ppb).
To know more about concentration click-
https://brainly.com/question/23437000
#SPJ4

A chemical equation is a symbol- and formula-based symbolic representation of a chemical reaction, with the reactant entities given on the left side and the product entities given on the right. Examples are NaOH+HClNaCl+H2O.

They are equations that use chemical symbols and formulae to express chemical reactions. The reactants are shown on the left in a chemical equation, and the products are shown on the right.

An arrow symbol, a list of reactants (the substances used to initiate the reaction), and a list of products (the substances produced during the reaction) make up a chemical equation.

To know more about chemical equation visit:-

https://brainly.com/question/28294176

#SPJ4

The difference in electronegativity between the atoms forming the chemical bonds inside the compound determines whether a compound is ionic or covalent.

When a metal reacts with a nonmetal, ionic compounds are formed. When two nonmetals respond with each other, covalent compounds are formed. A chemical bond is the attractive force that holds together all the atoms and groups of atoms inside a chemical species. This same electrostatic force of attraction among two oppositely charged ions is known as an ionic bond. Ionic bonds connect metals and nonmetals. A covalent bond is also known as a shared bond. These bonds link nonmetals together.

If the electronegativity difference between both the atoms forming the bond is greater than 2.00, the bond is ionic, and ionic compounds contain ionic bonds. If the difference in electronegativity between both the atoms forming the bond is between 0.00 and 2.00, the bond is a covalent bond, and the compound is a covalent compound.

To know more about the Chemical bonds, here

https://brainly.com/question/15444131

#SPJ4

Answer:

Phosphorus

Explanation:

Atomic number of phosphorus is 15. Its electronic configuration is 2,8,5. So, it needs 3 electrons to fulfill its outermost shell and attain stability. Thus, its valency is 3.

A) the number of water molecules in 0.23 moles is equal to 1.5 × 10²³.

B) The single displacement reaction:

    Ca + 2HCl →  CaCl₂ + H₂

C)  The double displacement reaction:

     Na₂SO₄ + 2NH₄Cl → 2NaCl  + (NH₄)₂SO₄

A displacement reaction can be described as one wherein a set of atoms is displaced by another set of atoms in a molecule.

A single displacement reaction can be demonstrated as a kind of redox reaction when an element moves out of its compound or one element is replaced by the other element from its own compound.

Double displacement reactions are carried out in aqueous solutions wherein the ions precipitate and exchange of ions happens.

The single displacement reaction between the calcium and HCl acid gives hydrogen gas and calcium chloride.

Ca + 2HCl →  CaCl₂ + H₂

Learn more about displacement reaction, here:

brainly.com/question/10210271

#SPJ4

Answer:

1.08 mol

Explanation:

To find the number of moles of potassium carbonate (K2CO3) in a 150.0 g sample, you need to know the molar mass of K2CO3. The molar mass is the mass of one mole of a substance, and it is expressed in grams per mole (g/mol).

The molar mass of K2CO3 is 138.20 g/mol. To find the number of moles in a 150.0 g sample, you can divide the mass of the sample by the molar mass:

Number of moles = mass / molar mass

= 150.0 g / 138.20 g/mol

= 1.08 mol

Therefore, there are 1.08 moles of K2CO3 in a 150.0 g sample.

Answer:

1.09 mol

Explanation:

The mass of K₂CO3 is 138

How

by calculating the individual molecular mass

K₂ + C + O3

= 2(39) + 12 + 3(16)

= 78 + 12 + 48

= 138g

formula for finding mole is

[tex]mole = \frac{given \: mass}{molar \: mass} [/tex]

[tex]mole = \frac{150}{138} [/tex]

mole = 1.0869565217

approximately

mole = 1.09 (2d.p)

i hope this helps

Answer: True

Explanation: physical substance in general, as distinct from mind and spirit; (in physics) that which occupies space and possesses rest mass, especially as distinct from energy.

When an air and fuel mixture has more gas than what is required for efficient combustion, a lean burn results.The ideal combustion ratio for burning propane entirely is 1 part propane (4%) to 24 parts air (96%).

If the area has a cold snap while your propane tank is much less than 20% full, you may run out of propane faster than you expect.If there isn't any propane, your house won't be warm.Without heat, your home is dangerous and uncomfortably cold.Additionally, it's possible for your pipes to freeze or explode.

Yes, they could, although this usually only applies to the portable, 20-lb grilling tanks, not the larger ones.A warm summer day can easily raise temperatures.Even as the portable propane tank warms up, the pressure will rise.

To know more about stoichiometric visit:

https://brainly.com/question/15047541

#SPJ4

The positive permanganate test occurs when a compound is oxidized by potassium permanganate, which results in the formation of manganese dioxide as a precipitate. This reaction's general chemical equation is:

The positive fuchsin-aldehyde test occurs when a compound reacts with fuchsin and aldehyde to form a pink or red color. The specific chemical equation for this reaction is not available, as it depends on the compound being tested.

The positive iodoform test occurs when a compound reacts with iodine in the presence of base to form iodoform (CHI3), which has a characteristic sweet, medicinal smell. This reaction's general chemical equation is:

Semicarbazone formation occurs when a compound reacts with a semicarbazide to form a semicarbazone. This reaction's general chemical equation is:

2,4-dinitrophenylhydrazone formation occurs when a compound reacts with 2,4-dinitrophenylhydrazine to form a 2,4-dinitrophenylhydrazone. This reaction's general chemical equation is:

The answer is general since the question is incomplete and the similar one is unavailable.

Learn more about Chemical Equation here: brainly.com/question/26694427

#SPJ4

Incorrect storage of food items can cause cross contamination.

What is Contamination?

Contamination is the presence of a pollutant or a foreign substance in an environment, such as air, water, or soil, which can have a negative impact on the surrounding environment and the organisms that live in it. Contamination can occur naturally or be caused by human activities, such as the release of chemicals, oil, or other hazardous materials into the environment.

This could include storing raw food items above cooked or ready-to-eat items in a refrigerator, improperly covering and sealing food items, and not properly labeling food items.

To know more about Contamination,

https://brainly.com/question/13754321

#SPJ4

Specific heat capacity of a substance is the amount of heat required to raise the temperature by one degree Celsius of one gram of a substance. Therefore, 2,488.03kJ/mol heat is  given off when 183 g of oxygen are reacted with benzene.

Enthalpy term is basically used in thermodynamics to show the overall energy that a matter have. Mathematically, Enthalpy is directly proportional to specific heat capacity of a substances. Internal energy is the sum of all kinds of energy that the particles of a matter can possess, for example translational energy. Rotational energy.

ΔHf = ∑ n ΔHproducts - ∑ n ΔHreagents

1 C₆H₆ + 7.5 O₂ → 6 CO₂ + 3 H₂O

moles of oxygen =183 /32

                           =5.71 mole

7.5 mole of oxygen reacts with 1 mole of benzene

1 mole of oxygen reacts with 1/7.5 mole of benzene

5.71 mole of benzene reacts with 1/7.5×5.71 =0.76moles

energy for one mole of benzene =3268kJ/mol

energy for 0.76moles  of benzene =0.76×3268

                                                         =-2,488.03kJ/mol

Therefore, 2,488.03kJ/mol heat is  given off when 183 g of oxygen are

reacted with benzene.

To know more about enthalpy, here:

https://brainly.com/question/24170335

#SPJ1