Answer:
Some cells, such as the frog egg cells shown here, divide every 30 minutes, and others take as long as a year! The table below compares the length of different cell cycles. 2. With each cell cycle, two cells form from one cell.
After 3 hours, the number of cells formed from one frog egg cell has been 64.
The division of the frog cell occurs every 30 minutes. Thus in 3 hours, the number of divisions occurs:
30 minutes = 1 division
3 [tex]\times[/tex] 60 minutes = [tex]\rm \dfrac{1}{30}\;\times\;180[/tex]
= 6 divisions.
The number of cells formed after n divisions can be given by = [tex]\rm 2^n[/tex]
where n is the number of division cycles.
The number of cells after 6 division cycles = [tex]\rm 2^6[/tex]
The number of cells = 64.
After 3 hours, the number of cells formed from one frog egg cell has been 64.
For more information about the frog egg cell, refer to the link:
https://brainly.com/question/20453882
Which best explains the difference between a monomer and a polymer?
A monomer is larger than a polymer.
A monomer contains carbon and a polymer does not.
A polymer contains carbon and a monomer does not.
A polymer is larger than a monomer.
The difference between the monomer and a polymer should be that monomer should be larger than a polymer.
Difference of monomer and a polymer?The monomer represent the molecule type where it has the capability for chemically the bond along with the other molecules with respect to the long chain. While the polymer should represent the chain of the non-specified the no of monomers.
Also, it represent the building blocks of polymers that contain more complex type of molecules
Learn more about polymer here: https://brainly.com/question/13209535
Answer:
A
Explanation:
AR
1. The table below lists some properties of a sample of lauric acid.
Property
Value
hf
Volume
hc
2
Mass
Boiling point
79.6 ml
70.022 g
222°C
Number of
moles
0.350
RT
Which of these is an intensive property of this sample?
Answer:
Boiling point
Explanation:
We define extensive properties as those properties that change with the amount of the substance present. These include; mass, weight, and volume.
Intensive properties, on the other hand, do not change with the amount of the substance present. They are characteristic of the substance. They include; color, melting point, boiling point, electrical conductivity, and physical state at a given temperature.
Which of the following is NOT a physical property?
A. melting point
B. state of matter
C. density
D. flammability
Answer:
i think.its D ddddddddddddd
What are ionic compounds
When an egg is boiled in a pot of water on the stove, there is more than one kind of heat transfer. Heat is transferred from the stove to the pot directly since they are physically touching. Heat is also transferred from the pot to the egg, carried through the water.
Answer:
Stove → Pot = conduction, Pot → Egg = convection.
Explanation:
There are three ways in which heat is being transferred from one medium to the other and the means are; radiation, conduction and convection heat transfer.
Radiation is the process in which heat is being transferred through emission in form of electromagnetism. Conduction heat transfer Is the process in which heat is being transferred through contact that is two bodies touching each other. Convection heat transfer is the kind of heat that happens through gases.
Since the heat from the stove touching the pot is the conduction heat transfer.
After the water has been heated up, the gas from the water makes the convection heat transfer.
plsss help
will mark BRAINLIEST
Answer:
c
Explanation: just a chemachal
if you had 15 moles of Oxygen (O2), how many moles of water (H2O) would you be able to make?
Answer:
30 moles of water will produced.
Explanation:
Given data:
Number of moles of O₂ react = 15 mol
Number of moles of water formed = ?
Solution:
Chemical equation:
2H₂ + O₂ → 2H₂O
Now we will compare the moles of water with oxygen.
O₂ : H₂O
1 : 2
15 : 2×15 = 30 mol
30 moles of water will produced.
Based on the chemical formula and state of matter, which of these substances will conduct electricity?
CuSO4(s)
CuSO4(aq)
C5H12(l)
CO2(g)
Answer:
CuSO4(aq)
Explanation:
The aqueous form of copper sulfate will conduct electricity.
The Solid form will not be a good conductor.
C₅H₁₂ will not conduct electricity
CO₂ will not conduct electricity
Copper sulfate is an ionic compoundIn aqueous solutions or molten forms, ionic compounds can conduct an electric current using free mobile ions as carriers. This way, they are electrolytes. In solid state, the ions are arranged into a crystal lattice and will not conduct a current of electricity.What two things determine the gravity of an object?
A. mass & distance
B. mass & weight
C. density & mass
D. distance & weight
Answer:
A mass and distance
Explanation:
Ok ok I know this isn’t about schoolwork but can ppl please comment how to ask a boy out?
Answer:
depends on the boy but don't try to hard be cool and just go for it 90 percent of the time they'll say yes
Explanation:
How does the quantum theory of atoms explain the nature of the emission-line spectrum of hydrogen?
Energy takes on discreet values, we notice that only certain values of energy are allowed hence the line spectrum of the hydrogen atom.
According to the Bohr model of the atom, energy levels within the atom is quantized. Energy quantization implies that energy occurs in discreet packets and do not take on intermediate values.
Because energy takes on discreet values, we notice that only certain values of energy are allowed hence the line spectrum of the hydrogen atom.
Learn more about atomic spectrum: https://brainly.com/question/2049494
A solution is made by dissolving 0.0503 kg of biphenyl (C12H10) in
350.0 mL of benzene (C6H6).
What would be the osmotic pressure (in atm) of this solution at 40.0
°C? (The density of benzene is 0.877 g/mL.)
Answer:
Letter A po
Explanation:
yanffdddddd
What is a way in which nuclear fusion is used?
O Space stations
O atomic bombs
O Nuclear power plants
O In stars
Which of the following is an example of a decomposition reaction?
Answer:
B is a decomposition reaction
The chemical equation which represents decomposition reaction is 2 NaCl[tex]\rightarrow[/tex] 2 Na + Cl₂.
What is chemical equation?Chemical equation is a symbolic representation of a chemical reaction which is written in the form of symbols and chemical formulas.The reactants are present on the left hand side while the products are present on the right hand side.
A plus sign is present between reactants and products if they are more than one in any case and an arrow is present pointing towards the product side which indicates the direction of the reaction .There are coefficients present next to the chemical symbols and formulas .
The first chemical equation was put forth by Jean Beguin in 1615.By making use of chemical equations the direction of reaction ,state of reactants and products can be stated. In the chemical equations even the temperature to be maintained and catalyst can be mentioned.
Learn more about chemical equation,here:
https://brainly.com/question/28294176
#SPJ5
Which option listed above represents the correct way the layers would form? Explain
your choice by describing which chemical or physical property determines the
layering.
Answer:
option 1 pls mark bbrainliest
What Group is this element in?
Answer:
sodium
Explanation:
Electric circuit are a pathway for ____ to flow
A.) Neutrons
B.) Protons
C.) Matter
D.) Electrons
Answer:
Electrons
Explanation:
The source that gives the voltage (force) causes the electrons to move.
Answer:
The answer is Electron
Explanation:
Which of the following combinations of quantum numbers (n, l, ml, ms) do NOT represent permissible solutions of the Schrodinger equation?
6, 5, -5, ½
6, -5, -1, ½
8,2,2, ½
All are allowed
9, 8, -4, ½
Explanation:
6, -5, -1, 1/2 is wrong because the angular momentum quantum number cannot be negative.
EASY QUESTION!!!! 12 POINTS!!!
Neutron____Neutron
push apart
pull together
Answer:
Neutron pull together Neutron
How many more valence electrons does this atom need to fulfill the Octet
Rule? (Urgent need help)
Answer: The octet rule is a bonding theory used to predict the molecular structure of covalently bonded molecules. According to the rule, atoms seek to have eight electrons in their outer—or valence—electron shells. Each atom will share, gain, or lose electrons to fill these outer electron shells with exactly eight electrons.
Explanation:
What is the primary result of a fission
reaction?
(1) conversion of mass to energy
(2) conversion of energy to mass
(3) binding together of two heavy nuclei
(4) binding together of two light nuclei
Answer:
(1) conversion of mass to energy
Explanation:
Nuclear fission: In nuclear fission, an unstable atom splits into two or more smaller pieces that are more stable, and releases energy in the process. The fission process also releases extra neutrons, which can then split additional atoms, resulting in a chain reaction that releases a lot of energy.
The primary result of a nuclear fission reaction is the conversion of energy to mass.
What is nuclear fission reaction?Nuclear fission reaction is a reaction in which the nucleus of an atom splits into two or more smaller nuclei. The nuclear fission reaction produces gamma photons and releases a very large amount of energy even by the energetic standards of radioactive decay.Hence, option 2 is the answer.
To learn more about nuclear fission reaction here
https://brainly.com/question/19721281
#SPJ2
when hydrogen atom absorbs a photon, and an electron moves level 1 to level 2, what happens to the energy of the atom?
Answer:
When an electron is hit by a photon of light, it absorbs the quanta of energy the photon was carrying and moves to a higher energy state. One way of thinking about this higher energy state is to imagine that the electron is now moving faster, (it has just been "hit" by a rapidly moving photon).
Explanation: pls mark brainliest :))
Explain why the mass of carbon must be decreasing in a different step of slow carbon cycle based on the increase in atmospheric CO2
Answer:
Carbon flows between the atmosphere, land, and ocean in a cycle that ... Coal and other fossil fuels are a convenient source of energy, but when ... If carbon dioxide rises in the atmosphere because of an increase in ... However, the slow carbon cycle also contains a slightly faster component: the ocean.
Explanation:
I got you fam
What will a medium mass star become at the very end of its life cycle
MULTIPLE CHOICE QUESTION URGENT URGENT URGENT PLS HELP ME
Answer:
The answer is 4
Explanation:
plz give me brainliest :)
In the following reaction, which element or compound is the oxidizing agent?
I NEED HELP ASAP
Answer:
[tex]O_{2}[/tex] is the oxidizing agent
Explanation:
An oxidizing agent is an element in a reaction that accepts the electrons of another element. It is typically hydrogen, oxide, or any halogen. In this case, it is oxygen. The answer is 02.
Answer:
i think it's 02 i might be wrongExplanation:
What element is in period 6 with 2 valence electrons?
Answer:
Barium
Explanation:
I think that's the answer
The element in period 6 with 2 valence electrons is Barium.
The periodic table has been organized into periods and groups. The period is in an horizontal arrangement while group is vertical arrangement. The elements that can be found in period 6 are Beryllium, Magnesium, Calcium, Strontium, Barium etc. Elements in the same group have the same number of valence electrons. This means that elements in group 2 have 2 valence electrons. Barium possess two valence electrons because it is in group 2 and it is also in period 6. Therefore, the element in period 6 with 2 valence electrons is Barium.Learn more at: https://brainly.com/question/24089206?referrer=searchResults
1. All ___matter______ is made of atoms that cannot be ______________________ or ____________________. 2. All _______________ of a given __________________ are ___________________ in mass and __________________.
Answer:
All the matter that is made of atoms that cannot be broken or beaten into thin sheet .2All matters of a given book are in mass and mixture
Which element in Period 3 has the largest atomic radius?
Answer:
sodium
Explanation:
Help!!!!!!!!!!!!!!!!!!
The density of the sample : 0.827 g/L
Further explanationIn general, the gas equation can be written
[tex]\large {\boxed {\bold {PV = nRT}}}[/tex]
where
P = pressure, atm , N/m²
V = volume, liter
n = number of moles
R = gas constant = 0.082 l.atm / mol K (P= atm, v= liter),or 8,314 J/mol K (P=Pa or N/m2, v= m³)
T = temperature, Kelvin
n= 1 mol
MW Neon = 20,1797 g/mol
mass of Neon :
[tex]\tt mass=mol\times MW\\\\mass=1\times 20,1797 =20.1797~g[/tex]
The density of the sample :
[tex]\tt \rho=\dfrac{m}{V}\\\\\rho=\dfrac{20,1797}{24.4}=0.827~g/L[/tex]
or We can use the ideal gas formula ta find density :
[tex]\tt \rho=\dfrac{P\times MW}{RT}\\\\\rho=\dfrac{1\times 20.1797}{0.082\times 298}\\\\\rho=0.826~g/L[/tex]