Is solar power and solar energy the same thing ?

Answer:

electrical to thermal and light

(may wanna change the answers)

and the one before that should be electrical to electrical i think

Explanation:

The FitnessGram Pacer Test is a multistage aerobic capacity test that progressively gets more difficult as it continues. The 20 meter pacer test will begin in 30 seconds. Line up at the start. The running speed starts slowly, but gets faster each minute after you hear this signal. A single lap should be completed each time you hear this sound. Remember to run in a straight line, and run as long as possible.

Answer:

D

Explanation:

because the whole town needs to be powered through some sort of energy and kinetic energy means the movement of something

The technology in the picture represents the conversion of kinetic energy to electrical energy. So, the correct option is D.

Kinetic energy of a body is defined as the energy acquired by the body due to the virtue of its motion.

Here,

The given picture represents the dam system at a town.

We know, according to conservation of energy, energy can neither be created nor be destroyed, but can be transferred from one form to another.

In the dam system, the application of conservation of energy is implemented.

Dam consists of a water stream and turbines. The water stream is arranged in such a way that, when the water is running from a height, the water acquires an energy in the form of kinetic energy.

This kinetic energy of the water is converted to electrical energy with the help of the turbines, which are rotating continuously and thus electricity is produced.

Hence,

The technology in the picture represents the conversion of kinetic energy to electrical energy.

To learn more about kinetic energy, click:

https://brainly.com/question/999862

#SPJ7

Answer:

F = 0

Explanation:

Given that,

Force acting to push a bin = 45 N

Mass of the plastic bin, m = 3 kg

The plastic bin is moving with a constant velocity.

We need to find the net force acting on the box. Constant velocity means the change in velocity is equal to 0. It means acceleration will be 0.

As a result, the force acting on the box is equal to 0.

Answer:

A. 20

Explanation:

The AWG rating of the wire can be determined by applying the formula;

[tex]d_{i}[/tex] = 0.005 x [tex]92^{\frac{(36 - s)}{39}} }[/tex]

where [tex]d_{i}[/tex] is the diameter of wire in inches, and s is the diameter of wire in AWG.

Given that [tex]d_{i}[/tex] = 0.032 inches, then;

0.032 = 0.005 x [tex]92^{\frac{(36 - s)}{39}} }[/tex]

[tex]\frac{0.032}{0.005}[/tex] =  [tex]92^{\frac{(36 - s)}{39}} }[/tex]

6.4 = [tex]92^{\frac{(36 - s)}{39}} }[/tex]

Find the log of both sides to have,

log 6.4 = log [tex]92^{\frac{(36 - s)}{39}} }[/tex]

log 6.4 = [tex](\frac{36 -s}{39})[/tex] log 92

[tex]\frac{log 6.4}{log92}[/tex] = [tex](\frac{36 -s}{39})[/tex]

0.410523 = [tex](\frac{36 -s}{39})[/tex]

36 - s = 0.410523 x 39

         = 16.0104

⇒ s = 36 - 16.0104

      = 19.9896

s = 20

Therefore, the AWG of the wire is 20.

Answer:

60

Explanation:

Every 60 minutes is an hour

Answer:

60; minute in 1 HR is the answer

Answer:

Valence electrons are always located in the outer most energy level.

Explanation:

Valence electrons are the ones that are involved in chemical bonds. In order to take part in a chemical bonding, the outermost/valence electron needs to be involved. Thus, the answer is Valence electrons are always located in the outer most energy level.

Answer:

26621 km

Explanation:

We are given;

Mass: m = 5.98 x 10^(24) kg

Period; T = 43200 s

Formula for The velocity(v) of the satellite is:

v = 2πR/T

Where R is the radius

Formula for centripetal acceleration is;

a_c = v²/R

Thus; a_c = (2πR/T)²/R = 4π²R/T²

Formula for gravitational acceleration is:

a_g = Gm/R²

Where G is gravitational constant = 6.674 × 10^(-11) m³/kg.s²

Now the centripetal acceleration of the satellite is caused by its gravitational acceleration. Thus;

Centripetal acceleration = gravitational acceleration.

Thus;

4π²R/T² = Gm/R²

Making R the subject gives;

R = ∛(GmT²/4π²)

Plugging in the relevant values;

R = ∛((6.674 × 10^(-11) × 5.98 x 10^(24) × 43200²)/(4 × π²))

R = 26.621 × 10^(6) m

Converting to km, we have;

R = 26621 km

Answer:

2.66 *10^7

Explanation:

Sorry I don't know the process if you were interested in that :/

Answer:

its food this was easy

Answer:

7,539 m/s

Explanation:

Let's use this equation to find the gravitational acceleration of this space shuttle:

We know that G is the gravitational constant: 6.67 * 10^(-11) Nm²/kg².

M is the mass of the planet, which is Earth in this case: 5.972 * 10^24 kg.

r is the distance from the center of Earth to the space shuttle: radius of Earth (6.3781 * 10^6 m) + distance above the Earth (630 km → 630,000 m).

Plug these values into the equation:

Remove units to make the equation easier to read.

Multiply the numerator out.

Add the terms in the denominator.

Simplify this equation.

The acceleration due to gravity g = 8.11045189 m/s². Now we use the equation for acceleration for an object in circular motion which contains v and r.

a = g, v is the velocity that the space shuttle should be moving (what we are trying to solve for), and r is the radius we had in the previous equation when solving for g.

Plug these values into the equation and solve for v.

Remove units to make the equation easier to read.

Multiply both sides by 7,008,100.

Take the square root of both sides.

The shuttle should be moving at a velocity of about 7,539 m/s when it is released into the circular orbit above Earth.

Answer:

can you include a picture

Decompose the forces acting on the rocket in horizontal and vertical components.

• net horizontal force:

∑ F = (12.3 N) cos(65°) - 2.5 N ≈ 2.7 N

(notice we're taking "to the right" to be the positive direction)

• net vertical force:

∑ F = (12.3 N) sin(65°) - 1.2 N ≈ 9.9 N

The resultant force then has magnitude

√((2.7 N)² + (9.9 N)²) ≈ 10.3 N

Since the horizontal and vertical components of the resultant are both positive, it points at an angle between 0° and 90° from the positive horizontal, so that

tan(θ) ≈ (9.9 N) / (2.7 N) ≈ 3.69

===>   θ ≈ arctan(3.69) ≈ 75°

Answer: your answer is B I know that's what you picked but I believe it is correct! look below...

Explanation: A solution is made when one substance called the solute "dissolves" into another substance called the solvent. Dissolving is when the solute breaks up from a larger crystal of molecules into much smaller groups or individual molecules.

In order to form a solution, the solute must be surrounded, or solvated, by the solvent. Solutes successfully dissolve into solvents when solute-solvent bonds are stronger than either solute-solute bonds or solvent-solvent bonds.

BRAINLIEST?

Answer:

h = 0.697 [m]  

Explanation:

To solve this problem we must use the energy conservation theorem, where it tells us that kinetic energy is converted to potential energy or vice versa.

[tex]E_{kinet}=E_{pot}[/tex]

where:

Ekinet = kinetic energy [J]

Epot = potential energy [J]

[tex]\frac{1}{2}*m*v^{2}=m*g*h\\0.5*(3.7)^{2} =9.81*h\\h =(6.845)/9.81\\h = 0.697 [m][/tex]

Answer:

The force is [tex]F = 0.1441 \ N[/tex]

Explanation:

From the question we are told that

   The volume of blood ejected is  [tex]V_b = 65cm^3 = 65*10^{-6} \ m^3[/tex]

    The velocity of the ejected blood is  [tex]v = 98 cm/ s = 0.98 \ m/s[/tex]

    The mass density of blood is  [tex]\rho = 1060 \ kg/m^3[/tex]

    The heart rate is  [tex]R = 61 bpm(beats \ per \ miunite) = \frac{61}{60} = 1.0667\ bps[/tex]

Generally the average force exerted is mathematically represented as

     [tex]F = 2 * \rho * V_b * R * v[/tex]

=>   [tex]F = 2 * 1060 * (65*10^{-6}) *1.0667 * 0.98[/tex]

=>   [tex]F = 0.1441 \ N[/tex]    

Answer:

66.475kJ

Explanation:

Work done is the product of the force and perpendicular distance in direction of the force.

Work done = Force × distance

Given

Weight = 700lb

Distance = 70ft

1lb force = 4.448N

700lb force = 700(4.448) = 3113.6N

Distance = 70(0.305) = 21.35m

Work done = 3113.6×21.35

Work done ≈ 66,475Joules

Work done = 66.475kJ

Answer:

Equal and opposite

Constant speed

Balanced

Unequal and non-opposite

Unbalanced

Explanation:

Balanced forces can be defined as forces which are equal in size but opposite in direction.

Now, these forces do not cause a change in motion because when they act on an object at rest, such an object will not move. For example, when attempt to push against a wall, the wall will push back with an equal but opposite force and neither you nor the wall will move.

While unbalanced forces are those that cause a change in the motion of an object.

Thus, these forces are said not to be equal and opposite.

Answer:

 N= 3

Explanation:

For this exercise we must use Faraday's law

          E = - dФ / dt

         Ф = B . A = B Acos θ

tje bold indicate vectors. As it indicates that the variation of the field is linear, we can approximate the derivatives

         E = - A cos θ (B - B₀) / t

The angle enters the magnetic field and the normal to the area is zero

         cos 0 = 1

         A = π r²

In the length of the wire there are N turns each with a length L₀ = 2π r

          L = N (2π r)

          r = L / 2π N

    we substitute

          A = L² / (4π N²)

The magnetic field produced by a solenoid is

           B = μ₀ N/L   I

for which

            B₀ = μ₀  N/L   I

The final field is zero, because the current is zero

            B = 0

We substitute

           E = - (L² / 4π N²)  (0 - μ₀ N/L I) / t

           E = μ₀ L I / (4π N t)

           N = μ₀ L I / (4π t E)

The electromotive force is E = 0.80 mV = 0.8 10⁻³ V

let's calculate

           N = 4π 10⁻⁷ 200 1.60 / (4π 0.120 0.8 10⁻³)]

           N  = 320 10⁻⁷ / 9.6 10⁻⁶

           N = 33.3 10⁻¹

          N= 3

Answer:

yes

Explanation:

Answer:

Explanation:

The the horizontal and vertical component be expressed as;

Fx = Fxos theta (horizontal compt)

Given Fx = 20N

theta = 30°

Get F:

20 = Fcos30

20 = 0.8660F

F = 20/0.8660

F = 23.09N

Get the magnitude of the other components. (vertical compt)

Fy = Fsin theta

Fy = 23.09sin30

Fy = 23.09(0.5)

Fy = 11.545N

Hence the magnitude of the other component is 11.545N

Answer: fossil fuels are using more in the existing world because fossil fuels are of great importance because they can burned producing significant amount of energy prr unit mass the use of coal as a fuel prefates recorded history

Explanation:

Answer:

A fossil fuel is a fuel formed by natural processes, such as anaerobic decomposition of buried dead organisms, containing organic molecules originating in ancient photosynthesis[1] that release energy in combustion.[2] Such organisms and their resulting fossil fuels typically have an age of millions of years, and sometimes more than 650 million years.[3] Fossil fuels contain high percentages of carbon and include petroleum, coal, and natural gas.[4] Peat is also sometimes considered a fossil fuel.[5] Commonly used derivatives of fossil fuels include kerosene and propane. Fossil fuels range from volatile materials with low carbon-to-hydrogen ratios (like methane), to liquids (like petroleum), to nonvolatile materials composed of almost pure carbon, like anthracite coal. Methane can be found in hydrocarbon fields alone, associated with oil, or in the form of methane clathrates.

Coal, a fossil fuel

As of 2018, the world's main primary energy sources consisted of petroleum (34%), coal (27%), and natural gas (24%), amounting to an 85% share for fossil fuels in primary energy consumption in the world. Non-fossil sources included nuclear (4.4%), hydroelectric (6.8%), and other renewables (4.0%, including geothermal, solar, tidal, wind, wood, and waste).[6] The share of renewables (including traditional biomass) in the world's total final energy consumption was 18% in 2018.[7] Compared with 2017, world energy-consumption grew at a rate of 2.9%, almost double its 10-year average of 1.5% per year, and the fastest since 2010.[8]

Although fossil fuels are continually formed by natural processes, they are generally classified as non-renewable resources because they take millions of years to form and known viable reserves are being depleted much faster than new ones are generated.[9][10]

Most air pollution deaths are due to fossil fuel combustion products, it is estimated to cost over 3% of global GDP,[11] and fossil fuel phase-out would save 3.6 million lives each year.[12]

The use of fossil fuels raises serious environmental concerns. The burning of fossil fuels produces around 35 billion tonnes (35 gigatonnes) of carbon dioxide (CO2) per year.[13] It is estimated that natural processes can only absorb a small part of that amount, so there is a net increase of many billion tonnes of atmospheric carbon dioxide per year.[14] CO2 is a greenhouse gas that increases radiative forcing and contributes to global warming and ocean acidification. A global movement towards the generation of low-carbon renewable energy is underway to help reduce global greenhouse-gas emissions.

Answer:

C

Explanation:

covalent. Hope that helps!

Answer:

The value  [tex]F  =  0.1396 \ N [/tex]

Explanation:

From the question we are told that

   The volume blood  ejected is  [tex]V = 65 \ cm^3 = 65*10^{-6} \ m^3[/tex]

    The velocity of the blood ejected is  [tex]v = 103 \ cm/s = \frac{103}{100} = 1.03 \ m/s[/tex]

    The density of blood is  [tex]\rho = 1060 \ kg/m^3[/tex]

     The heart beat is [tex]R = 59 \ bpm(beats \ per \ minute) = \frac{59}{60}= 0.9833\ bps[/tex]

The average force exerted by the blood on the wall of the aorta is mathematically represented as

      [tex]F = 2 * \rho * V * R * v[/tex]

=>    [tex]F  =  2 * 1060  *  65*10^{-6}  *  0.9833 *  1.03[/tex]

=>    [tex]F  =  0.1396 \ N [/tex]

Answer:

The force each one experienced

Explanation:

Hope this helps :)

Answer:

The  correct option is D

Explanation:

From the question we are told that

  The intensity of the first  electromagnetic wave is  [tex]I = 18 \ W/m^2[/tex]

  The amplitude of the electric field is  [tex]E_{max}_1 =A[/tex]

   The intensity of the second electromagnetic wave is  [tex]I = 36 \ W/m^2[/tex]

Generally the an electromagnetic wave intensity is mathematically represented as

       [tex]I = \frac{1}{2} * \epsilon_o * c * E_{max}^2[/tex]

Looking at this equation we see that

     [tex]I \ \ \alpha \ \ E^2_{max}[/tex]

=>  [tex]\frac{I_1}{I_2} = [ \frac{ E_{max}_1}{ E_{max}_2} ] ^2[/tex]

=>   [tex]E_{max}_2 = \sqrt{\frac{x}{y} } * E_{max}_1[/tex]

=>  [tex]E_{max}_2 = \sqrt{\frac{36}{18} } * E[/tex]        

=>  [tex]E_{max}_2 = \sqrt{2 } E[/tex]        

Answer:

Explanation:

The density of a substance is the ratio of its mass to its volume. Its unit of measurement is kg[tex]m^{-3}[/tex].

i.e density, ρ = [tex]\frac{mass}{volume}[/tex]

1a. To determine the density of the acetic acid, Rachael needs to know the mass and volume of the acid.

i. Measure the mass of the given beaker using the mass balance.

ii. Transfer the acetic acid into the beaker, and measure the new mass using the mass balance.

iii. Subtract the mass of the beaker from the new mass to determine the mass of the acetic acid.

iv. Measure the volume of the acid on the scale of the beaker.

v. Divide the value of the mass by its volume to determine its density of the acetic acid.

b. Given that the density is 1.05 g/[tex]cm^{3}[/tex], and volume is 200 [tex]cm^{3}[/tex].

Then,

density = [tex]\frac{mass}{volume}[/tex]

1.05 = [tex]\frac{mass}{200}[/tex]

mass = 1.05 x 200

         = 210 g

mass = 210 g

2. Length of titanium = 0.40 m

   Area of titanium = 0.05 [tex]m^{2}[/tex]

mass = 90.0 kg

density = [tex]\frac{mass}{volume}[/tex]

But,

volume = area x length

            = 0.05 x 0.4

           = 0.02 [tex]m^{3}[/tex]

density of titanium = [tex]\frac{90}{0.02}[/tex]

                = 4500 kg[tex]m^{-3}[/tex]

[tex]\huge\boxed{OptionA}[/tex]

mass = 4 kg

velocity = 5 m/s^2

Mass= 2kg

Velocity = 7m/s^2

mass = 6 kg

velocity = 4m/s^2

Mass = 8 kg

Velocity = 3 m/s^2

By the equation of kinetic energy,

                                         K.E = [tex]\frac{1}{2} mv^2[/tex]

Where,

            K.E is kinetic energy

            m is mass

            v is velocity

Directly substitute the variables in the equation,

                                       K.E = [tex]\frac{1}{2}x4x5^2[/tex]

Simplify the equation,

                                       K.E = 50 J

 Directly substitude the variable in the equation,

                                        K.E = [tex]\frac{1}{2}x6x4^2[/tex]

Simplify the equation,

                                        K.E = 48J

Substitute the variables in the equation,

                                         K.E = [tex]\frac{1}{2}x8x3^2[/tex]

Simplify the Equation,

                                         K.E = 36J

Substitute the variable,

                                        K.E = [tex]\frac{1}{2}x 2x7^2[/tex]

Simplify the equation,

                                        K.E = 49J

As you can see that the highest value of kinetic energy is of Blue SUV thus it will be out answer.

Answer:

Explanation:

Electrical energy is the correct answer

Answer:

Is B

Explanation:

Answer: 300m

1 minute = 60s

the unladen swallow can fly: 60.5 = 300 (m)

Explanation: