Answer:
where are the answers?
Explanation:
explain a mixture of molecules
Answer:
A mixture of molecules is a group of molecules in which there are multiple different elements and atoms, that are in either fixed proportions or random. There are heterogeneous and homogenous mixtures.
Explanation:
2. The two naturally occurring isotopes of hydrogen are hydrogen-1 ( 1.00783 amu; 99.9885 percent) and hydrogen-2 (2.01410 amu; 0.0115 percent). What is the average atomic mass of hydrogen?
A. 1.0079 amu
b. 1.0097 amu
c. 1.0309 amu
D. 1.5110 amu
Answer:
1.0079 g/mol
Explanation:
99.989% / 100% = 0.99989 hydrigen-1 , 0.0115% / 100% = 0.000115 hydrogen-2
0.99989 x 1.0078 = 1.0077 , 0.000115 x 2.0141= 0.000232
1.0077 + 0.00023
Answer: 1.0079
how do particles in the most rigid state of matter move
Explanation: In solids, particles are very closely packed in an orderly arrangement in a lattice and only vibrate in fixed positions. The forces of attraction between them are very strong. This allows them to overcome the forces of attraction that hold the other phases closer together
Calculate the minimum volume of oxygen gas, at room temperature and pressure(r.t.p). required to completely burn 56g of methane gas. Give your answer to two significant figures. (1 mole of any gas occupies 24 dm³ at r.t.p,Ar:C=12,H=1)
BALANCED EQUATION FOR THE BURNING OF METHANE GAS.
CH₄+2O₂→CO₂+2H₂O
Answer:
170 dm³ (2 significant figures)
Explanation:
CH₄ + 2O₂ → CO₂ + 2H₂O
We need to find how much 'volume' of O₂ is required to burn 56 g of CH₄.
Let's take the ratios of the two gases only.
CH₄ : 2O₂ (in terms of moles the ratio is 1:2)
56g : x dm³
Mr of CH₄ : Volume of oxygen at rtp
Find the Mr of CH₄.
Mr of CH₄ = 12 + (1 × 4) = 16
We know that 1 mole of any gas occupies 24 dm³ at room temperature and pressure (rtp). We have to find the volume of oxygen, there are 2 moles of oxygen, so 2 moles of gas will occupy:
2 × 24 = 48 dm³
56g : x dm³
16 : 48 dm³
16x = 56 × 48
16x = 2688
x = [tex]\frac{2688}{16}[/tex]
x = 168 dm³
∴ the minimum volume of oxygen gas, at room temperature and pressure required to completely burn 56g of methane gas is 170 dm³
Maximum s-character is observed in
a) Triple bonded carbon atom b) Double bonded carbon atom
c) Single bonded carbon atom d) Carbon atom of benzene
[tex]\huge{\underline{\underline{\boxed{\sf{\purple{ǫᴜᴇsᴛɪᴏɴ}}}}}}[/tex]
Maximum s-character is observed ina) Triple bonded carbon atom b) Double bonded carbon atomc) Single bonded carbon atomd) Carbon atom of benzene[tex]\huge{\underline{\underline{\boxed{\sf{\red{Answer}}}}}}[/tex]
Maximum s-character is observed ina) Triple bonded carbon atomFill in the blank:
A correctly written hypothesis uses an ____ ______ statement
Answer:
a theory of a experiment and the experiment acts like a judge determining if the hypothesis is right or wrong from the final test result
Explanation:
5 Stoichiometry Chemistry questions !
1. Determine the mass in grams of lithium hydroxide produced when 0.38 g of lithium nitride reacts. g LiOH
Li3N(s) + 3 H2O(l) --> NH3(g) + 3 LiOH(aq)
2. How many moles of sodium chloride are produced when 2.9 grams of sodium iodide reacts? mol NaCl
2 NaI(s) + Cl2(g) --> 2 NaCl(s) + I2(g)
3. What volume in liters of chlorine gas at STP would be required to fully react with 125 g of NaI? L Cl2
2 NaI(s) + Cl2(g) --> 2 NaCl(s) + I2(g)
4. Determine the volume in liters of carbon dioxide produced at STP when 0.85 grams of butane (C4H10) reacts. L CO2
2 C4H10(l) + 13 O2(g) --> 8 CO2(g) + 10 H2O(g)
5. Calculate the mass in grams of water vapor produced by the combustion of 51.3 L of propane, C3H8, at STP. g H2O
C3H8(g) + 5 O2(g) --> 3 CO2(g) + 4 H2O(g)
Which subatomic particles have a positive charge and are located in the nucleus?
a. neutrons
b. atoms
c. electrons
d. protons
Answer: protons
Explanation:
a) Neutrons are located in the nucleus but have a negative charge.
b) Atoms are not subatomic particles but are rather made of subatomic particles.
c) Electrons are subatomic particles with a negative charge that are located outside of the nucleus.
d) Protons are subatomic particles that are located in the nucleus and have a positive charge.
Find the molar mass of iron (III) nitrate, Fe(NO3)3
Answer:
Hey there are you doing are you doing I will tell you the answer
if a substance has a normal boiling point of 50 °c, what can you state about the vapor pressure of the same substance at 40 0 °c?
What is the significance of cell division?
A. to make ATP
B. to prevent replication
C. to repair and replace other cells
D. to make glucose
How many atoms le aluminum are in this compound
Does the amount of mentos affect the height of the pop explosion
Answer:
no
Explanation:
bcuz science
Answer:
The more mentos you put in a bottle of pop does not necessarily mean a larger explosion. The max amount of mentos with the largest explosion was 4 mentos, it went 350 cm high. With 5 or 6 mentos the explosion went only 330 and 310 cm high.
Hope this helped in some way?
What is the chemical formula for nitrogen monoxide?
Answer: the formula is NO
what is the three-dimensional coordination number of the face-centered cubic arrangement?
The three-dimensional coordination number of the face-centered cubic arrangement has a coordination number of 12 and contains 4 atoms per unit cell.
What is coordination number ?The coordination number, also known as ligancy, of a central atom in a molecule or crystal is the sum of all the atoms, molecules, or ions that are linked to it. This value is used in crystallography and materials science. A ligand is the ion, molecule, or atom that surrounds the center ion, molecule, or atom.
The number of atoms, ions, or molecules that a central atom or ion bears in a complex or coordination compound or in a crystal as its near neighbors is known as the coordination number, also known as ligancy.
In contrast to oxidation state, which is a number assigned to an element in chemical combination and represents the number of electrons lost or gained by an atom of that element in the compound, co-ordination number is the number of co-ordination bonds with which the ligands are bound to the central ion.
Thus, the face-centered cubic arrangement has a coordination number of 12 and contains 4 atoms per unit cell.
To learn more about coordination number, follow the link;
https://brainly.com/question/16882931
#SPJ5
Examples of errors in colorimetry experiments
Answer:
The lack of accuracy and underestimation of absorbance readings obtained from the colorimeter can be contributed to many experimental factors. One plausible error is from the imperfection of the absorber, in that it may not completely absorb the stray light passing by the perimeters of the photoresistor.
Explanation:
In practice there are other sources of error, such as environmental effects on photometer and sample, temperature, line voltage fluctuations, vibrations, contamination, or heating of the sample by the photometer. All these factors may impair the measured result, and ways and means are known to test and eliminate them.
If the velocity of a wave is 12 m/s and its frequency is 600 hertz, what would be its wavelength?
Answer:
The wavelength is 0.02 m.
Step-by-step explanation:
Given :
[tex]\green\star[/tex] Velocity = 12 m/s[tex]\green\star[/tex] Frequency = 600 HzTo Find :
[tex]\green\star[/tex] WavelengthUsing Formula :
Apply Wavelength formula :
[tex]\star{\small{\underline{\boxed{\sf{\purple{\lambda = \dfrac{v}{f}}}}}}}[/tex]
[tex]\pink\star[/tex] λ = Wavelength [tex]\pink\star[/tex] v = Velocity [tex]\pink\star[/tex] f = FrequencySolution :
Finding the wavelength by substituting the values in the formula :
[tex]{\longrightarrow{\sf{\lambda = \dfrac{v}{f}}}}[/tex]
[tex]{\longrightarrow{\sf{\lambda = \dfrac{12}{600}}}}[/tex]
[tex]{\longrightarrow{\sf{\lambda = \dfrac{\cancel{12}}{\cancel{600}}}}}[/tex]
[tex]{\longrightarrow{\sf{\lambda = \dfrac{2}{100}}}}[/tex]
[tex]{\longrightarrow{\sf{\lambda = \cancel{\dfrac{2}{100}}}}}[/tex]
[tex]{\longrightarrow{\sf{\lambda = 0.02}}}[/tex]
[tex]\star{\underline{\boxed{\tt{\red{\lambda = 0.02 \: m}}}}}[/tex]
Hence, the wavelength is 0.02 m.
Why is it important to be careful when walking on an icy sidewalk?
Ice moves faster than you do.
There is less friction on an icy surface.
Ice is heavier than you, so it is a greater force.
none of the above
Answer:
The is less friction on an icy surface
Explanation:
This is because when u walk on plain ground there is steady friction on the surface but when u walk on an icy floor these is barely any friction which is why it's hard to walk on.
Answer:
There is less friction on an icy surface.
Hope that helps.
Explanation:
for the reaction 2nh3(g)↽−−⇀ 3h2(g)+n2(g), if 15.8 grams of ammonia produced 1.87g of hydrogen, what was the percent yield
Answer:
75%
Explanation:
So, the reaction will consume 1 mole of hydrogen gas and produce
1mole H2⋅2 moles NH33moles H2=0.667 moles NH3
at 100% yield. This represents the reaction's theoretical yield.
Now, you know that the reaction produced 0.50 moles of ammonia. This represents the reaction's actual yield.
In order to find the percent yield, you need to figure out how many moles of ammonia are actually produced for every 100 moles of ammonia that could theoretically be produced.
You know that 0.667 moles will produce 0.50 moles, so you can say that
100moles NH3.in theory⋅0.50 moles NH3.actual0.667moles NH3.in theory=75 moles NH3.actual
Therefore, you can say that the reaction has a percent yield equal to
% yield = 75%
Please help me, trying to get all my hw done
Answer:
C. size and shape
Explanation:
Physical properties such as size, shape, color, density, magnetism or the
ability to sink or float can be used to separate the substances in a mixture..
Filtration is when matter is passed through a filter and the larger particles
are separated out. Magnets can be used to separate magnetic matter from
non-magnetic matter in a mixture. Objects that float when placed in water
can be separated from those that don’t by placing the mixture in water.
where does oxidation occur in an electrochemical cell
Will give 10 points.
Why does an atom have a neutral charge?
A It has equal numbers of electrons and protons.
B. The number of neutrons equals the number of protons and
electrons in the atom.
C. It has equal numbers of electrons and neutrons.
D. It has equal numbers of neutrons and protons.
Answer:
option A it has equal numbers of electrons and protons
Explanation:
electrons are negatively charged and protons are positively charged, so if the numbers of each are equal, then the atom will be neutral.
Answer:
A. it has equal numbers of electrons and protons
Explanation:
The overall charge of every atoms is neutral because the number of electrons and protons is the same. Protons are positively charged while electrons are negatively charged and so they cancel out.
PLZZZZ HELP MEEE I WILL GIVE BRAINLYEST I need more then ever so can you can pls help a bro out I need this done in before 5:00 it 2:00 now
Answer:
If it becomes buried deep into the earth and it is open to increased temperate and pressure. Then an Igneous rock could be Metamorphic. This process can take a lot of time but eventually the rock will change due to pressure andbhigher temperatures.
Write the complete electron configuration using the diagonal rule for strontium.
What is the Lewis structure for Iodide?
Answer:
In the Lewis structure for IF5 you'll need to put a total of 12 valence electrons on the Iodine atom in order to draw the Lewis structure. Remember that Iodine (I) can hold more than eight valence electrons. For the IF5 Lewis structure, calculate the total number of valence electrons for the IF5 molecule
Explanation:
I be knowing hope this helps
can someone please explain how to find an emperical formula given mass not percentage?
Answer:
1. Get the mass of each element by assuming a certain overall mass for the sample (100 g is a good mass to assume when working with percentages). ...
2. Convert the mass of each element to moles. ...
3. Find the ratio of the moles of each element. ..
4. Use the mole ratio to write the empirical fomula
Answer:
Multiply each result by the given mass.
Explanation:
Hi!
In order to find percent/mass composition you would
1. write the formula
2. calculate the molar mass for each equation
3. add all the masses to get the compound molar mass
4. divide each molar mass by the total mass
and then for mass composition, you would multiple eachy result by the given mass.
For example;
Calculate the number of grams of gold in 89.6 grams of gold(1) perchlorate.
Your formula would be AuClo4
Au : 196.96 x 1
Cl: 35.4 x 1
O: 16 x 4
Add the masses together to get 296.5 g/mol
Lets say we're looking for Oxygen. You would take what you got (16 x 4) and divide it by the total mass. 64/296.5
This would equal 0.215. Instead of multiplying this by 100 like you would for percent, for mass you would multiply by what is given. in this instance it is 89.6.
0.215 x 89.6 = 19
But the question is asking for gold,
197/296
= 0.664 x 89.6
= 59.5
Your answer would be 59.5 grams Au
Hope this helped! : D
arrange the compounds from lowest boiling point to highest boiling point.
Answer:
ion- ion> H - bonding > dipole > dipole> london dispersion
What halogen can react with sodium chloride solution to produce chlorine?
Answer:
As electro-negativity decreases from Florine to downwards in the group and only Florine is above Chlorine, so Florine should react with sodium chloride solution to produce chlorine.
mark me brinilylist pls
What is the process that results in the formation of an ion
Two samples of solids have similar reactivity with acids and similar densities. Their masses
and volumes, however, are not at all similar. Is it possible that these are the same
substance? (1 point)
O. No, it is not possible because they have different extensive properties.
O Yes, it is possible because they have similar intensive properties.
O Yes, it is possible because they have similar extensive properties.
O No, it is not possible because they have different intensive properties.
They may be the same substance even though they have different volumes and masses.
Intensive properties are the properties are characteristic a substance. Intensive properties are those properties of a substance that can be used to describe the substance.
We can see that the substances have similar reactivity and similar density. This means that they may be the same substance even though they have different volumes and masses.
The correct option is; "Yes, it is possible because they have similar intensive properties."
Learn more: https://brainly.com/question/17323212