Write a Python code that takes two sequences CATCGTCCT and CACCGACCG and prints the point mutations found when aligning the two sequences. Tip: you simply need to write a for loop to go over the length of the sequences, pick a letter from each position,and, compare the two sequences position by position for matches and report the mismatches.

Answer:

Following are the code to the given question:

def match_sequence(s1,s2):#Defining a method match_sequence that accepts two parameters

for l in range(len(s1)):#defining a loop that checks range of s1 value

if(s1[l] != s2[l]): # use if block to match each sequences

print('The sequence does not match at index: ',l+1)#print value with message

s1 = 'CATCGTCCT'#defining a string varible s1

s2 = 'CACCGACCG'#defining a string varible s1

match_sequence(s1,s2)#calling a method that prints its values

Output:

The sequence does not match at index: 3

The sequence does not match at index: 6

The sequence does not match at index: 9

Explanation:

In this code, a method "match_sequence" is declared that takes two string variable "s1 and s2" in its parameters, and inside the method, a loop is declared that checks the range of s1 value and use if block to match each sequence and use a print method that prints it values.

Outside the method, two string variables are declared that holds a string value that passes into the "match_sequence" method and calls it.

You are responsible for a rail convoy of goods consisting of several boxcars. You start the train and after a few minutes you realize that some boxcars are overloaded and weigh too heavily on the rails while others are dangerously light. So you decide to stop the train and spread the weight more evenly so that all the boxcars have exactly the same weight (without changing the total weight). For that you write a program which helps you in the distribution of the weight.
Your program should first read the number of cars to be weighed (integer) followed by the weights of the cars (doubles). Then your program should calculate and display how much weight to add or subtract from each car such that every car has the same weight. The total weight of all of the cars should not change. These additions and subtractions of weights should be displayed with one decimal place. You may assume that there are no more than 50 boxcars.
Example 1
In this example, there are 5 boxcars with different weights summing to 110.0. The ouput shows that we are modifying all the boxcars so that they each carry a weight of 22.0 (which makes a total of 110.0 for the entire train). So we remove 18.0 for the first boxcar, we add 10.0 for the second, we add 2.0 for the third, etc.
Input
5
40.0
12.0
20.0
5. 33.
0
Output
- 18.0
10.0
2.0
17.0
-11.0

A list is sorted in ascending order if it is empty or each item except the last one is less than or equal to its successor.

a. True
b. False

Write a Python class that inputs a polynomial in standard algebraic notation and outputs the first derivative of that polynomial. Both the inputted polynomial and its derivative should be represented as strings.

You will write code to manipulate strings using pointers but without using the string handling functions in string.h. Do not include string.h in your code. You will not get any points unless you use pointers throughout both parts.
You will read in two strings from a file cp4in_1.txt at a time (there will be 2n strings, and you will read them until EOF) and then do the following. You alternately take characters from the two strings and string them together and create a new string which you will store in a new string variable. You may assume that each string is no more than 20 characters long (not including the null terminator), but can be far less. You must use pointers. You may store each string in an array, but are not allowed to treat the string as a character array in the sense that you may not have statements like c[i] = a[i], but rather *c *a is allowed. You will not get any points unless you use pointers.
Example:
Input file output file
ABCDE APBQCRDSETFG
PQRSTFG arrow abcdefghijklmnopgrstuvwxyz
acegikmoqsuwyz
bdfhjlnprtvx

What is the meaning of integreted progam and it examples​

What is digital marketing?

Which best describes the possible careers based on
these employers?
Yoshi worked in Logistics Planning and Management
Services, Dade worked in Sales and Service, Lani
worked in Transportation Systems/Infrastructure
Planning, Management, and Regulation, and Miki
worked in Transportation Operations.
Yoshi worked in Transportation Operations, Dade
worked in Logistics Planning and Management
Services, Lani worked in Sales and Service, and Miki
worked in Transportation Systems/Infrastructure
Planning, Management, and Regulation
Yoshi worked in Health, Safety, and Environmental
Management, Dade worked in Transportation
Operations, Lani worked in Facility and Mobile
Equipment Maintenance, and Miki worked in
Warehousing and Distribution Center Operations.

In Word, when you conduct a merge a customized letter, envelope, label is created for each record in the data source. True or False.

write a c program to insert and delete values from stack( to perform pop and push operations) using an array data structure

define the term hardwar

​

in the lungs,blood picks up carbon dioxide and releases oxygen true or false

If you want to continue working on your web page the next day, what should you do?

a. Create a copy of the file and make changes in that new copy

b. Start over from scratch with a new file

c. Once a file has been saved, you cannot change it

d. Reopen the file in your text editor to

One of your suppliers has recently been in the news. Workers complain of long hours, hot and stuffy workrooms, poor lighting, and even no functioning bathrooms. Some workers are less than 14 years old. Workers are paid 10 cents for each piece they complete, and fast workers are capable of finishing 50 pieces. What is the best way to describe these working conditions?

sweatshop
cottage industry
assembly line
slavery

Which statement is correct?
Flat files use foreign keys to uniquely identify tables.

Flat files use foreign keys to secure data.

A foreign key is a primary key in another table.

A foreign key uniquely identifies a record in a table.

(The Person, Student, Employee, Faculty, and Staff classes) Design a class named Person and its two subclasses named Student and Employee. Make Faculty and Staff subclasses of Employee. A person has a name, address, phone number, and email address.A student has a class status (freshman, sophomore, junior, or senior). Define the status as a constant. An employee has

Look at the code below and use the following comments to indicate the scope of the static variables or functions. Place the comment below the relevant line.

Module scope
Class scope
Function scope

#include
2
3 static const int MAX_SIZE=10;
4
5 // Return the max value
6 static double max(double d1)
7 {
8 static double lastMax = 0;
9 lastMax = (d1 > lastMax) ? d1 : lastMax;
10 return lastMax;
11 }
12
13 // Singleton class only one instance allowed
14 class Singleton
15 {
16 public:
17 static Singleton& getSingleton() { return theOne; }
18 // Returns the Singleton
19

Define a class Complex to represent complex numbers. All complex numbers are of the form x + yi, where x and y are real numbers, real numbers being all those numbers which are positive, negative, or zero.

Drag each statement to the correct location.

Determine if the given statements are true or false.

The hexadecimal equivalent

of 22210 is DE

The binary equivalent of

D7 is 11010011

The decimal equivalent of

1316 is 19.

True

False

e Highlight
fogy
ст)
4 uses of information
communication technology in the health sector​

4 reasons why users attach speakers
to their computers​

Write a function that takes number between 1 and 7 as a parameter and prints out the corresponding number as a string. For example, if the parameter is 1, your function should print out one. If the parameter is 2, your function should print out two, etc. If the parameter is not between 1 and 7, the function should print an appropriate error message. In your file, you should include a main() that allows the user to enter a number and calls your function to demonstrate that it works.

The divBySum method is intended to return the sum ofall the elements in the int arrayparameter arr that are divisible by the intparameter num. Consider the following examples, in whichthe array arrcontains {4, 1, 3, 6, 2, 9}.The call divBySum(arr, 3) will return 18,which is the sum of 3, 6, and 9,since those are the only integers in arr that aredivisible by 3.The call divBySum(arr, 5) will return 0,since none of the integers in arr are divisibleby 5.Complete the divBySum method using anenhanced for loop. Assume that arr isproperly declared and initialized. The method must use anenhanced for loop to earn full credit./** Returns the sum of all integers inarr that are divisible by num* Precondition: num > 0*/public static int divBySum(int[] arr, int num)

The new software organization requires a new point of sale and stock control system for their many stores throughout Pakistan to replace their aging mini-based systems.
A sales assistant will be able to process an order by entering product numbers and required quantities into the system. The system will display a description, price, and available stock. In-stock products will normally be collected immediately by the customer from the store but may be selected for delivery to the customer's home address for which there will be a charge. If stock is not available, the sales assistant will be able to create a backorder for the product from a regional warehouse. The products will then either be delivered directly from the regional warehouse to the customer's home address, or the store for collection by the customer. The system will allow products to be paid for by cash or credit card. Credit card transactions will be validated via an online card transaction system. The system will produce a receipt. Order details for in-stock products will be printed in the warehouse including the bin reference, quantity, product number, and description. These will be collected by the sales assistant and given to the customer. The sales assistant will be able to make refunds, provided a valid receipt is produced. The sales assistant will also be able to check stock and pricing without creating an order and progress orders that have been created for delivery.
You need to answer the following questions. (Marks 6)
1. Which elicitation method or methods appropriate to discover the requirement for a given scenario system to work efficiently, where multiple sales and stock points manage. Justify your answer with examples.
2. Identify all stakeholders for a given scenario according to their roles and responsibilities with suitable justifications.
3. Specify functional users and systems requirements with proper justifications.

11 Select the correct answer. Which external element groups items in a design?
A coloring items
B. sorting items
c. underlining items
D directing items blurring items​

4. What is a motion path?​

Can someone help me with this lab assignment? I really do not know what should I do?
This assignment
The program you wrote in Stacks 1 is incomplete. Without a destructor it creates a memory leak. A destructor has been defined in this program but it is incorrect. To visualize how the destructor works, a cout statement has been added. Fix the errors, including the cout statement, to display the value in each node of the stack before releasing the memory.
Write a loop in main() to enter an unknown number of positive integers. The loop stops when you enter 0 or a negative number. As you are entering integers, they are to be pushed onto a stack.
Ex.: If the user enters '10 20 30 -1` the output (from the destructor) should be:
30 - deleted!
20 - deleted!
10 - deleted!
Empty stack!
Ex.: If the user enters '-1` the output should be:
Empty stack!
This is the code:
#include
using namespace std;
class Stack_int
{
private:
// Structure for the stack nodes
struct StackNode {
int value; // Value in the node
StackNode *next; // Pointer to next node
};
StackNode *top; // Pointer to the stack top
int length; // Number of nodes
public:
Stack_int(){ top = NULL; length = 0; } //Constructor
~Stack_int(); // Destructor
// Stack operations
// bool isEmpty();
bool push(int);
// int pop();
// int peek();
// int getLength();
};
/**~*~*
Member function push: pushes the argument onto the stack.
*~**/
bool Stack_int::push(int item)
{
StackNode *newNode; // Pointer to a new node
// Allocate a new node and store num there.
newNode = new StackNode;
if (!newNode)
return false;
newNode->value = item;
// Update links and counter
newNode->next = top;
top = newNode;
length++;
return true;
}
/**~*~*
Destructor
*~**/
Stack_int::~Stack_int()
{
StackNode *currNode;
// Position nodePtr at the top of the stack.
currNode = top;
// Traverse the list deleting each node.
while (currNode)
{
cout << currNode->value << " - deleted!" << endl;
delete currNode;
currNode = NULL;
currNode = currNode->next;
}
cout << "Empty stack!" << endl;
}
int main() {
Stack_int s;
int item;
return 0;
}

Ten output devices you know

PLEASE HURRY I WILL GIVE BRAILIEST TO WHO EVER ANSWERS AND IS CORRECT
Select all benefits of using a wiki for business.


inexpensive

accessible twenty-four hours per day and seven days per week

online conversation

quick and easy editing

document sharing

1. Programmable logic controllers (also called
PLCs) are used to control machines and other
industrial applications with
instead
of using hard-wired devices.

web analytics can tell you many things about your online performance, but what can analytics tools not tell you​