Hydrogen + Oxygen → Water.
2. How many grams are in 2.05 x 1030 atoms of Lithium (Li)?
Which type of light would make an object appear larger and closer?
Answer:
A convex lens bends light rays inward, which results in the object being perceived as larger or closer.
Explanation:
The light ray refracted from an object may look different based on how they bends light and at what angle. Convex lens bends light inwards and the refracted light appear closer and bigger whereas, a concave lens makes light ray away and smaller.
What is refraction?Refraction is the optical phenomenon by which a light ray bends in its direction when passing from one medium to the other. For instance light ray bends when it pass from air to water or air to glass and vice versa.
The measure of bending of light in a medium is called refractive index of that medium. Refraction makes the object appear to be closer sometimes such as in water when light bends in direction.
When light refracts from convex lens, the bending is inwards and the object is perceived to be closer and larger. Whereas, a concave lens make the bending outwards where the object appeared to be smaller and far.
To find more on refraction, refer here:
https://brainly.com/question/14760207
#SPJ2
What is the percent yield of LiCl if I produced 30.85g LiCl and my theoretical yield was calculated to be 35.40g LiCl?
Answer:
87.15%
Explanation:
To find percent yield, we can use this simple equation
[tex]\frac{Actual}{Theoretical} *100[/tex]
Where "Actual" is the amount in grams actually collected from the reaction, and "Theoretical" is, well, the theoretical amount that should have been produced.
They give us these values, so to find the percent yield, just plug the numbers in.
[tex]\frac{30.85}{35.40} *100\\\\ =87.15[/tex]
So, the percent yield is 87.15%
An easy trick to remember how to do this is just to divide the smaller number by the bigger number and move the decimal back two places. If you have a percent yield greater than 100%, something is wrong in the reaction.
Describe the motion of molecules in these two
substances when the ice cube is placed on the
radiator.
Answer:
When in direct contact, the fast-moving molecules in the radiator collide with the slow-moving molecules in the ice cube. Kinetic energy is transferred from the molecules in the radiator to the molecules in the ice cube, causing a slowdown of the radiator molecules and an acceleration of the ice molecules.
Explanation:
Answer
when in direct contact, the fast-moving molecules in the radiator collide with the slow-moving molecules in the ice cube. Kinetic energy is transferred from the molecules in the radiator to the molecules in the ice cube, causing a slowdown of the radiator molecules and an acceleration of the ice molecules.
Explanation:
When you take off a wool hat, some of the electrons from your hair transfer to
the hat. When this happens, your hair can stand up on end. Why doesn't
gravity hold your hair down?
A. The distance to the center of Earth is vastly larger than between
the hat and your hair,
B. The electrical field caused by the charged hair disrupts the
gravitational field near your hair
C. The electrostatic force is stronger than the gravitational force
between Earth and your hair,
D. The gravitational force between the hat and your hair opposes
Earth's gravitational force,
Answer:
C. The electrostatic force is stronger than the gravitational force
between Earth and your hair
Explanation:
Electrostatic forces are extremely strong. When your hair becomes charged from the electrons, it causes the strands of your hair to repel (push away) from each other because they have like (the same) charges.
what part of the food chain is a mink
a: secondary consumer
b: primary consumer
c:prouducer
d:herbivore
Answer: A secondary consumers
Explanation:
They are carnivores, feeding on primary consumers. The Bobcat, Raccoon, Mink, and Bass are all secondary consumers.
Please help!!! I will mark you brainiest!!!
Answer:
Some positive effects of using synthetic plastic is that scientist can make it softer and biodegradable so that nature can break it down and destroy it so it won't affect the environment. And scientist can also make stronger and tougher in products so they can last longer.
Explanation:
an unknown sample with a mass of 50.0 grams changes from an initial temperature of 22.5°C to a final temperature of 32.4°C. It is known that the sample absorbed 444 J and f heat l. Bases on this information, what substance in the table is most likely the identity of this sample?
Answer:
Aluminum
Explanation:
Which is the correct formula for finding the frequency of an electromagnetic wave? f = c – lambda f = StartFraction lambda over c EndFraction. f = lambda + c f = StartFraction c over lambda EndFraction.
Answer: It's D
Explanation:
Answer:
the answers d if you give brainliest give it to the other person im not worthy of it
Explanation:
16. What is the typical diameter of an atom?
A. | 10-14 m
B. I x 10-12 m
C. | 10-10 m
D. | x 10-8 m
HELPP PLSS
dentify whether each element is a halogen, a noble gas, or nonmetal only.
Astatine (At):
Nitrogen (N):
Krypton (Kr):
Chlorine (Cl):
Sulfur (S):
Astatine : Halogen
Nitrogen : Nonmetal
Krypton : Noble gas
Chlorine : Halogen
Sulfur : Nonmetal
i just needed the points sorryyy
The speed of sound through air at 20°C is 343 meters per second. The speed of sound through fresh water at 20°C is 1,482 meters per second.
Which of the following could be the speed of sound through solid steel?
A.
1,370 meters per second
B.
353 meters per second
C.
5,960 meters per second
D.
145 meters per second
Answer:
C. 5960 meters per second
What part of the food chain is a mink?
Answer:
The minks are very high on the aquatic food chain. The mink is a carnivorous animal, which means it eats only meat.
Explanation:
Answer:
The minks are very high on the aquatic food chain. The mink is a carnivorous animal, which means it eats only meat.
How does burning affect an object's property? Burning can cause an object to increase in volume. Burning changes the chemical make up of an object. Burning can create the item to increase in mass. Burning keeps the chemical make up of an object the same.
Answer: Burning changes the chemical make up of an object.
Explanation:
A chemical change can be defined as a change in the substance when it combines with other kind of substance to form a new substance. A chemical change can also occur when a substance is broken down into two or more products. These changes cannot be reversed. These changes affect the physical make up of an object. For example, burning as when an object is burned it cannot be transformed into its original form. A wood if burned can be converted into ash, water and carbon dioxide cannot regain its original form after burning so burning brings about chemical change in an object.
What is the 11th element in period 4?
plz don't send me another tiny link
Answer: According to my ggle search its Copper!
Explanation:
Explanation:
sodium is the 11thHow many mL of 0.25 M NaOH would have 0.18 moles of NaOH
Answer:
[tex]720\ \text{mL}[/tex]
Explanation:
M = Molarity of NaOH = 0.25 M = 0.25 mol/L
n = Number of moles of NaOH = 0.18 moles
Volume of solution is given by
[tex]V=\dfrac{n}{M}[/tex]
[tex]\Rightarrow V=\dfrac{0.18}{0.25}[/tex]
[tex]\Rightarrow V=0.72\ \text{L}\times 10^3=720\ \text{mL}[/tex]
The volume of NaOH in the solution is [tex]720\ \text{mL}[/tex].
Whats molecular formula of 26,4% carbon , 3,3 % Hydrogen and 70,3% oxygen?
Explanation: Therefore the molecular formula is twice the empirical formula: C2H6O2. The compound dioxane contains only carbon, hydrogen, and oxygen. When 0.956 g dioxane is burned, 1.91 g carbon dioxide and 0.782 g water are formed. In another experiment, it was determined that 6.04x10-3 mol dioxane weighs 0.532 g.
please help!!! I have to submit this in a few!!!
Answer:
c
Explanation:
If I perform a dilution, which is true? *
volume of solvent decreases
volume of solution increases
amount of solute increases
amount of solute decreases
Answer:
Amount of solute decreases
Explanation:
Since during dilution, the solute dissolves on the solvent hence its amount decreases.
Which one of the following is an example of a balanced chemical reaction?
A
C3H60 + 30 2 + 3C0 2 + 3H 20
B 2C 3H 60 + 90 2+ 6CO2 + 6H 20
© C3H60 +90 2 +300 2 +3H 20
D) 2C 3H 60 + 90 2+ 6CO2 + 3H 20
C3H 60 + 40 2 + 3CO 2 + 3H 20
An example of a balanced chemical reaction (equation) is: D. [tex]C_3H_60 + 40_2[/tex] ----> [tex]3CO_2 + 3H_20[/tex]
In Chemistry, a chemical equation is typically used to denote or represent the chemical reaction between two or more chemical elements.
A balanced chemical equation can be defined as a chemical equation wherein the number of atoms on the reactant (left) side is equal to the number of atoms on the product (right) side.
This ultimately implies that, both the charge on each atom and sum of the masses of the chemical compounds or elements in a chemical equation are properly balanced.
Ideally, the first step in balancing a chemical equation is to count the number of atoms in the reactant and product side.
[tex]C_3H_60 + 40_2[/tex] ----> [tex]3CO_2 + 3H_20[/tex]
For reactants:
Carbon = 3 atoms.Hydrogen = 6 atoms.Oxygen = 1 + 8 = 9 atoms.For products:
Carbon = 3 atoms.Hydrogen = 6 atoms.Oxygen = 6 + 3 = 9 atoms.Since, the number of atoms on the reactant (left) side is equal to the number of atoms on the product (right) side, this is an example of a balanced chemical reaction (equation).
Read more: https://brainly.com/question/13750908
Please help on question 7 and 8, i really need help and this is for marks! I only have 9 min left i will mark brainliest to whoever gives the best answer!
Answer:
I'm going to go with conduction
Explanation:
At first I thought it was combustion but I read the problem incorrectly. It seems like the liquid boils after you put them on the hot plate.
It's most likely conduction because heat and energy is being transferred into the liquid from the hot plate
how does a spectral signature help scientists determine the composition of planets and other stars???
Answer:
How do scientists determine the chemical compositions of the planets and stars? Each element absorbs light at specific wavelengths unique to that atom. When astronomers look at an object's spectrum, they can determine its composition based on these wavelengths. ... That fingerprint often appears as the absorption of light.
Explanation:
We can conduct different spectroscopic techniques for the sample collected from stars and planets to determine their composition. Using these techniques, scientists can identify the compounds and elements present in them.
What are spectroscopic techniques ?There are various spectroscopic techniques such as IR spectroscopy, UV- visible spectroscopy, mass spectroscopy etc. to determine the composition of both inorganic and organic compounds.
The IR spectroscopy uses the vibrational transitions of molecules by the absorption of IR radiation. The stretching or bending frequency of each functional groups are characteristic to them. Hence, we can determine the functional groups present in the molecules.
Similarly mass spectrum, atomic emission spectrum etc. provide valuable information about the sample under study including their mass and elemental compositions. Hence, spectral signature definitely helpful to determine the composition in stars and planets.
Find more on spectroscopy:
https://brainly.com/question/30256292
#SPJ6
In hydrogen, in order for an electron to emit visible light, it must fall from
some energy state and stop where?
A. 1st energy level
B. 2nd energy level
C. 3rd energy level
D. 4th energy level
Answer:
B
Explanation:
A student pours 800.0 mL of a 3.000 molar solution of sodium hydroxide into a 2.00 liter volumetric flask and fills the flask up with water. What is the new molarity of the solution?
A) 12.00 M
B) 1.20 M
C) 14.00 M
D) 0.0750 M
help me with this question
In physical and chemical changes, the number of atoms and weight of the object always stays the same.
In a chemical change, the substance changes into a different substance.
I'm pretty sure this next one is can or can not be seperated, depending on what has been mixed. Not positive tho.
Convert 678.92 cm into meters
Answer:6.7892 meters
Explanation:
PLEASE HELP WILL GIVG BRAINLEST
Answer:
It is option #1.
Explanation:
Biotechnology is defined as, "The exploitation of biological processes for industrial and other purposes, especially the genetic manipulation of microorganisms for the production of antibiotics, hormones, etc."
Therefore, option #1 is your answer!
How many grams of NaOH (MW = 40.0) are there in 500.0 mL
of a 0.175 M NaOH solution?
A) 3.50
B) 114
C) 14.0
D) 2.19x10
Answer:
3.5
Explanation:
500*0.175= 8.75 *40/1000=3500/1000=3.5
Answer:
3.50 grams
Explanation:
Mastering chem
What are similarities and differences between a falling object and a pendulum?
Answer:
The similarity is that they both follow the laws of physics.
In both cases, the motion is opposed by the medium where the object presses through the medium and forces it to part and flow around the object. This creates friction.
If an object is smooth and pointed like a bomb, the friction is minimised. If it is rough with pockets or vertical flat surfaces, the friction is maximised. A parachute presents a round hollow cup face to the flow, maximising friction. This is due to a hole in the top of the parachute.
The difference is the power source. In the vertical direction it is generated by gravity, the force created by the planet. This force is opposed not only by friction but also the difference between the density of the object and the medium surrounding it. If there is a large difference then the acceleration will be large and a high percentage of g.
For example we have a density of 1000 kg/meters cubed and air has a density of 1 Kg per meters cubed, the difference is 999, so we fall at an acceleration of 999/1000 x g. minus the effects of friction.
In the horizontal direction, gravity still opposes the movement creating friction in the vertical direction such as dragging a heavy object on the floor behind you. Force needs to be created horizontally to oppose the friction and to create an acceleration. A balance is soon reached where the acceleration stops and the object is dragged at a constant velocity.
Concentration is ?